Structure type

Design and build custom transport structures. With the Piako Builder configurator, you can choose the elements that you want and need from our wide selection. Try different options as well as freely combine elements as you build your commercial vehicle right before your eyes.
Enter the dimensions of your vehicle and choose the weight category, type of structure, and the equipment you want. You can determine in detail lifting and attachment equipment, cage and flatdeck equipment, as well as electrical equipment and chassis accessories.
We will send you an offer via email. The modeling image of the transport structure you are building will be updated via the link.
Select the bodywork of your choice from the alternatives. Please note that Piako also manufactures other bodywork structures that are not currently in the Piako builder. If you require a different bodywork, please be in contact with our sales!
Based on the number of axles, the gross vehicle weight rating will be calculated and the supporting frame structure is measured based on it. In addition, the number of axles has an impact on the number of mudguards.
The selected external width is measured at the widest point of the structure. The interior height is the interior height of the cargo space, which is higher than the loading height.
Breaking strength 1.5 kN, nominal strength 0.75 kN, material: zinc electroplated steel. Hole 25 mm, pitch 40.5 mm
Surface-mounted track. Breaking strength 1.5 kN, nominal strength 0.75 kN, material: zinc electroplated steel. Hole 25 mm, pitch 40.5 mm.
Stable and lightweight tail lift for use on light/medium duty trucks in the 5 to 12 ton GVW class. Lifting capacity 1,000 kg.
Air heater for small to medium sized spaces.
Mini controller in the cab of the vehicle for controling the temperature and ventilation in the carego area.
Overall dimensions: (mm) (w x h x l) 925x295x230
Weight: (kg) 16,4
Voltage: (V) 12/24
Thermal power: (W) 1500/2700/4800/5500
Fuel consumption: (l/h) 0,19/0,34/0,58/0,66
Air volume (m3/h) 90/140/210/233
Input power: (W) 15/30/80/85
The cargo space is lighted by LED lights. The vehicles original wiring assembly and electrical switch are made use of during assembly
For the internal lighting of the cargo space in transport equipment
6x3 efficiently grouped LEDs
IP 66, EMC protected
12 V / 4 W = 0.33 A
24 V / 4 W = 0.14 A
Light flux: 600 lm (max)
Colour temperature: white (4,000 K)
Theoretical service life: 50,000 h
Interior lighting of the vehicle's load compartment:
6x3 effectively arranged LED lights
IP 66, EMC guarded
12 V / 4 W = 0,33 A
24 V / 4 W = 0,14 A
Luminous flux: 600 lm (max)
Color temperature: white (4000 K)
Theoretical lifetime: 50 000 h
The cargo space is lighted by LED lights. The vehicles original wiring assembly and electrical switch are made use of during assembly
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Rear-view camera
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
KL 1501 LED worklight meets the basic lighting demands. Technical details
Theoretical lighting power: 500lm
Practical lighting power: 300lm
Colour temperature: 5700K
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Steps and handles assembled at the rear of the cage make climbing into the cage easier
Steps and handles assembled at the rear of the cage make climbing into the cage easier
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Cover made of polished RST steel, aluminium body. Hot galvanised brackets. Cage with a key lock.
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Breaking/nominal strength 40 kN/20 kN
Bolt-on and/or weld-on attachment
Zinc electroplated
Easy-to-use lashing holes in the body profile.
Enables transportation of long equipment with the rear board in place. Material: hot galvanised steel
Teline lapiolle, harjalle ja rautakangelle
Teline lapiolle, harjalle ja rautakangelle
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Rear-view camera
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
KL 1501 LED worklight meets the basic lighting demands. Technical details
Theoretical lighting power: 500lm
Practical lighting power: 300lm
Colour temperature: 5700K
Nordic KL1501 LED työvalot asennettuna etusermin päälle (2 kpl).
Asennuksessa hyödynnetään ajoneuvoalustan työvalovalmiutta.. Tekniset tiedot
Teoreettinen valoteho: 500lm
Operatiivinen valoteho: 300lm
Värilämpötila: 5700
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
Exremely thin (10 mm), efficient, and wide ranged yellow blinking light.
Additional information:
ECE R65 (XA1), ECE R10-05 (EMC)
Keltaisilla LED-valoilla varustettu 1200mm leveä vilkkupaneelin hytin katolle.
Hyväksynnät: ECE R65 TA1, ECE R10, SAE
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
50 mm stationairy ball coupling. Maximum theoretical pulling capacity is 25,1 kN. Includes an accepted underrun protection device
50 mm fixed ball switch. D value 25.8 kN, including an approved underrun protector
50 mm stationairy ball coupling. Maximum theoretical pulling capacity is 25,1 kN. Includes an accepted underrun protection device
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Kiinteä sinkitty nousuaskelma lavarunkoon
Kiinteä sinkitty nousuaskelma lavarunkoon
Number of rod locks
Breaking strength 1.5 kN, nominal strength 0.75 kN, material: zinc electroplated steel. Hole 25 mm, pitch 40.5 mm
The flush-mounted tracks do not reduce the inner width of the cargo space. Hole diameter 25 mm
Surface-mounted track. Breaking strength 1.5 kN, nominal strength 0.75 kN, material: zinc electroplated steel. Hole 25 mm, pitch 40.5 mm.
Lashing ring adapter
Air heater for small and medium-sized spaces
Small-sized control for cabins, for adjusting the cargo space heat and ventilation
External thermal probe for the cargo space
Protective case made of durable fibreglass
Main measures: (mm) (w x h x d) 925x295x230
Weight: (kg) 16.4
Voltage: (V) 12/24
Thermal capacity: (W) 1500/2700/4800/5500
Fuel consumption: (l/h) 0.19/0.34/0.58/0.66
Amount of air: (l/h) 90/140/210/233
Input power: (W) 15/30/80/85
Air heater for medium-sized and large spaces
Operating switch for adjusting the cargo space heat and ventilation
External thermal probe for the cargo space
Protective case made of durable fibreglass
TECHNICAL DATA IL E8
Main measures: (mm) 1085x370x330
Weight: (kg) 26.8
Voltage: (V) 12/24
Thermal capacity: (W) 3000/8000
Fuel consumption: (l/h) 0.40/1.00
Amount of air: (m3/h) 250
Input power: (W) 15/115
Air heater for small and medium-sized spaces
Small-sized control for cabins, for adjusting the cargo space heat and ventilation
External thermal probe for the cargo space
Protective case made of durable fibreglass
Overall dimensions: (mm) (w x h x l) 925x295x230
Weight: (kg) 16.4
Voltage: (V) 12/24
Thermal capacity: (W) 1500/2700/4800/5500
Fuel consumption: (l/h) 0.19/0.34/0.58/0.66
Amount of air: (l/h) 90/140/210/233
Input power: (W) 15/30/80/85
The cargo space is lighted by LED lights. The vehicles original wiring assembly and electrical switch are made use of during assembly
For the internal lighting of the cargo space in transport equipment
6x3 efficiently grouped LEDs
IP 66, EMC protected
12 V / 4 W = 0.33 A
24 V / 4 W = 0.14 A
Light flux: 600 lm (max)
Colour temperature: white (4,000 K)
Theoretical service life: 50,000 h
Interior lighting of the vehicle's load compartment:
6x3 effectively arranged LED lights
IP 66, EMC guarded
12 V / 4 W = 0,33 A
24 V / 4 W = 0,14 A
Luminous flux: 600 lm (max)
Color temperature: white (4000 K)
Theoretical lifetime: 50 000 h
The cargo space is lighted by LED lights. The vehicles original wiring assembly and electrical switch are made use of during assembly
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Rear-view camera
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
KL 1401 LED worklight meets the basic lighting demands. Technical details
Theoretical lighting power: 3200lm
Practical lighting power: 2000lm
Colour temperature: 5700K
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
Exremely thin (10 mm), efficient, and wide ranged yellow blinking light.
Additional information:
ECE R65 (XA1), ECE R10-05 (EMC)
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Steps and handles assembled at the rear of the cage make climbing into the cage easier
Steps and handles assembled at the rear of the cage make climbing into the cage easier
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Cover made of polished RST steel, aluminium body. Hot galvanised brackets. Cage with a key lock.
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Breaking/nominal strength 70 kN/35 kN
Direct pull 90 kN
Angular pull (60°) 78 kN
Weld-on attachment
Turning ring in a case
Breaking/nominal strength 80 kN/40 kN
Weld-on attachment
Enables transportation of long equipment with the rear board in place. Material: hot galvanised steel
4kpl Karikkapattereita
1200mm korkeat karikkatolpat.
4, 6 tai 8kpl
4kpl Karikkapattereita
Vaneri 30mm tai Teräs Kyynellevy 6/8mm
Vaneri 30mm tai Teräs Kyynellevy 6/8mm
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Rear-view camera
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
KL 1401 LED worklight meets the basic lighting demands. Technical details
Theoretical lighting power: 3200lm
Practical lighting power: 2000lm
Colour temperature: 5700K
Nordic KL1401 LED työvalot asennettuna etusermin päälle (2kpl). Asennuksessa hyödynnetään ajoneuvoalustan työvalovalmiutta. Tekniset tiedot
Teoreettinen valoteho: 3200lm
Operatiivinen valoteho: 2000lm
Värilämpötila: 5700K
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
Exremely thin (10 mm), efficient, and wide ranged yellow blinking light.
Additional information:
ECE R65 (XA1), ECE R10-05 (EMC)
Keltaisilla LED-valoilla varustettu 1400mm leveä vilkkupaneelin hytin katolle.
Hyväksynnät: ECE R65 TA1, ECE R10, SAE
Ylileveän kuljetuksen valot eteen ja taakse
Ylileveän kuljetuksen valot eteen ja taakse
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
50 mm stationairy ball coupling. Maximum theoretical pulling capacity is 25,1 kN. Includes an accepted underrun protection device
50 mm fixed ball switch. D value 25.8 kN, including an approved underrun protector
50 mm stationairy ball coupling. Maximum theoretical pulling capacity is 25,1 kN. Includes an accepted underrun protection device
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
600x600x2400 kokoinen puomilaatikko.
600x600x2400 kokoinen puomilaatikko.
Number of rod locks
Breaking strength 1.5 kN, nominal strength 0.75 kN, material: zinc electroplated steel. Hole 25 mm, pitch 40.5 mm
The flush-mounted tracks do not reduce the inner width of the cargo space. Hole diameter 25 mm
Surface-mounted track. Breaking strength 1.5 kN, nominal strength 0.75 kN, material: zinc electroplated steel. Hole 25 mm, pitch 40.5 mm.
Lashing ring adapter
Air heater for small and medium-sized spaces
Small-sized control for cabins, for adjusting the cargo space heat and ventilation
External thermal probe for the cargo space
Protective case made of durable fibreglass
Main measures: (mm) (w x h x d) 925x295x230
Weight: (kg) 16.4
Voltage: (V) 12/24
Thermal capacity: (W) 1500/2700/4800/5500
Fuel consumption: (l/h) 0.19/0.34/0.58/0.66
Amount of air: (l/h) 90/140/210/233
Input power: (W) 15/30/80/85
Air heater for medium-sized and large spaces
Operating switch for adjusting the cargo space heat and ventilation
External thermal probe for the cargo space
Protective case made of durable fibreglass
TECHNICAL DATA IL E8
Main measures: (mm) 1085x370x330
Weight: (kg) 26.8
Voltage: (V) 12/24
Thermal capacity: (W) 3000/8000
Fuel consumption: (l/h) 0.40/1.00
Amount of air: (m3/h) 250
Input power: (W) 15/115
Air heater for small and medium-sized spaces
Small-sized control for cabins, for adjusting the cargo space heat and ventilation
External thermal probe for the cargo space
Protective case made of durable fibreglass
Overall dimensions: (mm) (w x h x l) 925x295x230
Weight: (kg) 16.4
Voltage: (V) 12/24
Thermal capacity: (W) 1500/2700/4800/5500
Fuel consumption: (l/h) 0.19/0.34/0.58/0.66
Amount of air: (l/h) 90/140/210/233
Input power: (W) 15/30/80/85
The cargo space is lighted by LED lights. The vehicles original wiring assembly and electrical switch are made use of during assembly
For the internal lighting of the cargo space in transport equipment
6x3 efficiently grouped LEDs
IP 66, EMC protected
12 V / 4 W = 0.33 A
24 V / 4 W = 0.14 A
Light flux: 600 lm (max)
Colour temperature: white (4,000 K)
Theoretical service life: 50,000 h
Interior lighting of the vehicle's load compartment:
6x3 effectively arranged LED lights
IP 66, EMC guarded
12 V / 4 W = 0,33 A
24 V / 4 W = 0,14 A
Luminous flux: 600 lm (max)
Color temperature: white (4000 K)
Theoretical lifetime: 50 000 h
The cargo space is lighted by LED lights. The vehicles original wiring assembly and electrical switch are made use of during assembly
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Rear-view camera
A Rear-view camera covered by a shutter flap which is asembled on the rear of the vehicle. The camera has a heating element as well as flat display screen (colour) mounted on the dashboard
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
KL 1401 LED worklight meets the basic lighting demands. Technical details
Theoretical lighting power: 3200lm
Practical lighting power: 2000lm
Colour temperature: 5700K
Powerful LED work lights add safety to your work day. The vehicles original wiring assembly and electrical switch are made use of during assembly
Exremely thin (10 mm), efficient, and wide ranged yellow blinking light.
Additional information:
ECE R65 (XA1), ECE R10-05 (EMC)
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Side underrun guards for protecting pedestrians and cyclists are mandatory for all trucks. Choose side guards if your truck is not already equipped with approved side guards. Piako’s side guards are made of anodised aluminium profiles.
Steps and handles assembled at the rear of the cage make climbing into the cage easier
Steps and handles assembled at the rear of the cage make climbing into the cage easier
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
Cover made of polished RST steel, aluminium body. Hot galvanised brackets. Cage with a key lock.
Lid manufactured from polished stainless steel. Frame is manufactured from aluminum. Holders are hot-dip galvanized. The cage has a key-lock.
This page uses cookies to offer you a better browsing experience. By accepting or continuing to browse our site, you agree to the use of cookies. Find out more.